Make sure the printer door is closed (magnetic lock)
Use KVM to switch to the host machine (stew1):
Use the software ObjectStudio to load the model in STL format
Place model onto printing bed with appropriate scale, translation, and rotation in the software
Optionally use the auto placement to automatically place multiple objects
Save the tray file
Make sure the remaining material is more than want is needed (need to switch to printer-computer view and compare to job requirement on host machine); when putting in material, make sure to put them in the same way to prevent leaking
Press build tray to send the model to the printer
Build time varies from 0 to 10 hours in practice.
The printer will warm up before printing
During printing, one can pause, stop and resume
After stop, the last layer number is shown when you resume
After pause, the last layer number is required for resume the operation
You can look at the printer interface for the last layer number